• Free Delivery

    Free Delivery*

  • 30 Day money back guarantee

    30 Day money back guarantee

  • 25+ Years Experience

    25+ Years Experience

  • Australian Owned and Operated

    Australian Owned and Operated

Reverse Osmosis 4 Stage Portable

$449.00
(2 reviews) Write a Review
SKU:
PS-ROPT
Previous Code: RO4
Reverse Osmosis 4 Stage Portable

Fluoride Removal 96% - 98% - PORTABLE - LAUNDRY MODEL

CLICK HERE FOR COMPLETE FITTING INSTRUCTIONS 

Normally installed in laundry either on a shelf or attached to the wall by means of the bracket. Connection to your water supply is with a 3/4" adaptor which is installed between your cold water tap and hose. A ball valve allows you to direct water to your unit as required. laundry-connection1.jpg
Your pure drinking water is easily collected in sterile containers and stored in the refrigerator. Complete with Membane Flushing Service Mode to ensure purity of water by removing crystalisation build up with a 1 to 1 ratio of pure water to waste water.

Unit comes assembled with 3/4" Adaptor, Ball Valve, installation instructions and cartridge spanner for easy maintenance.  LIFETIME* WARRANTY

SKU PS-ROPT
Manufacturer Omnipure
Description Easy to install - removes 96% - 98% Fluoride Excellent flow rate - produces 2 litres every 10 minutes. Complete with 300 gpd Dow Filmtec membrane, 1 micron sediment pre filter, 5 micron Omnipure C-78 Chlorine removal pre filter and Omnipure post filter. Includes Membrane flushing service mode to ensure purity of water by removing build up of crystallisation. Alkaline and/or remineralising cartridge an optional extra.
System Size 35W x 42H x 17D cm
Service Life 12 Months/ 3 800 Litres
Replacement Cartridges CP-ROPT

2 Reviews Hide Reviews Show Reviews

  • 4
    great product though confusing manual

    Posted by chey on 11th Oct 2016

    Very satisfied with the water filter however I needed a plumber family member to set it up for me because the manual was extremely technical and confusing!

  • 5
    Exeptional water quality now

    Posted by Paul Stanitzki on 2nd Mar 2015

    We have been living in the North West of W.A. for the last 11 years. The towns water supply hear is just under 1200ppm dissolved and undissolved salts. I suspected it was high but until we tested it recently was unaware how high. After installing your R.O. system it is now 120ppm. (The lowest reading we have obtained yet from various systems tested)